Dana 44 Hub and Rotor, Big Bearing, 6 on 5.5" Spacing, 1977 and Newer Chevy / GM, (D44-6X5.5HR)

Dana 44 Hub and Rotor, Big Bearing, 6 on 5.5" Spacing, 1977 and Newer Chevy / GM

If you have a 1976 and older Chevy / GM Dana 44, you will need to change out the spindle to our large bearing spindle, PM706570X-NB, for this hub to work. This is because the 1976 and older spindle uses a smaller inner bearing. The quickest way to know what spindle you have is to check the OD of the spindle where the inner bearing rides. If spindle has a 2" OD where the inner bearing rides, you have the large bearing spindle. If the spindle has a 1.78" OD where the inner bearing rides, you have the small bearing spindle and will need to get a new spindle with this hub. 

Note:

Brake Pads Sold Separately. Part Number: MKD52

Requires 7/16" x 20 tpi. lug nuts.  

Height: 7.06"

Outside Diameter: 11.85"

Qty. 1